Rockford Fosgate Stage 4 Polaris RZR Stereo

  • $ 2,199.00
  • Save $ -200


Free Shipping in the Lower 48

Stage 4 Rockford Fosgate RZR Stereo


Rockford Fosgate's Stage 4 Polaris RZR audio upgrade kit with a digital marine receiver, four speakers, a 4-channel amp, a 10" subwoofer, and a mono sub amp, this system really rocks. Each component is tough enough for trail duty, so whether you're racing up a sand dune or blasting through a mud pit, you won't have to worry about your audio gear getting swamped. 

Product Highlights:

  • system includes digital marine receiver, two sets of speakers, a 4-channel amp, a 10" subwoofer, and a mono sub amp
Rockford Fosgate PMX-2 marine digital media receiver (does not play CDs)
  • built-in amplifier (20 watts RMS/50 peak x 4 channels)
  • works with Apple and Android smartphones
  • global AM/FM/Weather tuner
  • 2.7" color display
Rockford Fosgate RM1652B 6-1/2" 2-way marine speakers
  • power handling up to 75 watts RMS (105 watts peak)
  • salt-, fog-, and UV-resistant Santoprene rubber surround
  • integrated 1" volcano dome tweeter
Rockford Fosgate RM1652W-MB 6-1/2" Prime roll bar speakers
  • loaded with marine-rated RM1652B marine speakers
  • 360° rotational mounting capability for unlimited flexibility
  • high density poly-ethylene enclosure with UV inhibitors
Rockford Fosgate RM110D2B 10" marine subwoofer
  • power handling: 200 watts RMS (400 watts peak)
  • rugged, UV-stable injection-molded plastic construction
  • dual 2-ohm voice coils
  • durable Santoprene rubber surround
Rockford Fosgate PBR300X4 4-channel amp
  • 75 watts RMS x 4 at 4 ohms
  • selectable high- and low-pass filters (80 Hz, 12 dB/octave)
  • Dynamic Thermal Management cooling system
Rockford Fosgate Punch PBR300X1 mono subwoofer amplifier
  • 75 watts RMS x 1 at 4 ohms (150 watts RMS x 1 at 2 ohms)
  • variable low-pass filter (35-250 Hz, 12 dB/octave)
  • Dynamic Thermal Management cooling system

What's in the Box:

  • PMX-2:
  • Marine digital media receiver
  • Trim-ring
  • Mounting plate
  • Mounting bracket
  • Wiring harness
  • Backstrap
  • 4 Machine screws
  • 4 Hex-nuts
  • Installation/Operation booklet
  • RFRZ-PMX2DK:
  • Trim-panel
  • 2 Shoulder-head bolts
  • 4 Mounting screws
  • 2 Spring-clips
  • Power/ground harness
  • Hex-key
  • Installation Instructions
  • PBR300X4:
  • 4-Channel amplifier
  • Two 7" Speaker output harnesses (Molex plug on one end and tinned bare wire on the other)
  • Two 12" Input harness (Molex plug on one end and female stereo RCA jacks on the other)
  • Installation & Operation manual
  • Amplifier Performance Verification Certificate
  • PBR300X1:
  • Mono amplifier
  • 6" Speaker output harness (Molex plug on one end and tinned bare wire on the other)
  • 12" Input harness (Molex plug on one end and female stereo RCA jacks on the other)
  • Installation & Operation manual
  • Amplifier Performance Verification Certificate
  • RM1652W-MB:
  • 2 Wakeboard tower speakers
  • 2 Mounting couplers
  • Two 16" Speaker harnesses
  • 4 Plastic grommets
  • 4 Mounting bolts
  • 2 Security bolts (pre-installed)
  • 4 Nuts
  • 2 Safety lanyards
  • 2 Lanyard washers
  • Torx wrench
  • Installation & Operation Manual
  • RM1652:
  • Two 2-way marine speakers (with fixed grilles)
  • Eight 1-1/4" Stainless steel Allen head screws
  • 3mm Allen head bit
  • 8 Speed clips
  • Installation/Operation manual
  • RFRZ-FSE:
  • 2 Empty speaker pods
  • 2 Threaded studs
  • 4 Mounting screws
  • 2 Mounting bolts
  • 6 Washers
  • 2 Self-adhesive pads
  • Installation Instructions
  • RM110D2B:
  • 10" Woofer
  • Grille
  • 8 Screws
  • Installation Instructions
  • RFRZ-FWE:
  • Sub enclosure
  • 3 Brackets
  • 15" Wiring harness
  • 5 Large screws
  • 2 Medium screws
  • 2 Small screws
  • 2 Nuts
  • Installation Instructions
  • RFRZ-RSW16:
  • 8' Left rear speaker harness
  • 8' Right rear speaker harness
  • 8 Wire-ties
  • Installation Instructions
  • PM-CL2B:
  • 2 Mounting clamps
  • RFRZ-K4D:
  • 9' Power/ground/speaker harness (inline 100A fuse inside fuse-holder)
  • 38" Power/ground harness
  • Three 28" RCA harnesses
  • 64" Speaker harness
  • Amplifier mounting bracket
  • 8 Machine screws
  • 8 Washers
  • 4 Plastic grommets
  • 8 Wire-ties
  • 2 Self-adhesive foam pads
  • Installation Instructions