SPLYT Supercharged Technology Stator/Voltage Regulator & High Output Flywheel - RMS900-106872

RMS900-106872

RMSTATOR

  • $ 616.55
  • Save $ 32.45


This charging upgrade provides a tremendous 900W output to allow you to install accessories without draining the original battery nor installing a secondary battery. This upgrade installs seamlessly freeing the space a second battery would take on your ride.

Use for Polaris machines listed below that need more power to the electrical system. Most Polaris machines have 650W stators. Newer Pro R and Turbo R machines have 800w stators. Each 13w of stator output is about 1 amp more power available. W=IxE

 Details


RMSTATOR SPLYT Technology provides a reliable solution to well-known charging system failures. Using a dual output stator with two completely separate stator windings, this system splits the power generated by the stator into two separate voltage regulators. These regulators then each operate with only half of the load of the original system, allowing them to maintain a lower temperature and increase reliability. 

Ultimate reliability
With a stock charging system, voltage regulators are consistently operating within 5% of their maximum capacity, leading to heat and stress related failure. With the RMSTATOR SPLYT system, both SERIES voltage regulators are operating with 40% overhead for long life and stable output.

Better design
Contrary to the original OEM stator that uses one three phase stator winding, the SPLYT stator contains two completely separate three-phase coil windings. Each of these two windings then produces half of the power of the stock stator lowering the temperature in each individual coil.

Easy to install
All parts use a Plug-and-Play design, just like the original OEM ones, so no special tool or knowledge is needed to install this system.

Harnesses included
Relocation wiring harnesses allow to relocate the regulators anywhere on your vehicle to get better air flow and easier access.

This kit includes:

  • Dual output stator
  • Two SERIES voltage regulators
  • Improved high output flywheel
  • Two automotive grade relocation wiring harnesses with OEM-quality heavy-duty connectors
  • Flywheel puller
  • Gasket
  • Complete instructions for voltage regulator relocation

Solve your Polaris RZR & Sportsman charging system issues today, once and for all, with RMSTATOR!

Note:

  • This kit includes two wiring harness according to Polaris recal # Z-16-01-C (OEM # 2206620, 2206367,2206473). We strongly suggest you to relocate both of your regulators to make sure they do not wear out prematurely due to mud, dust or rocks.


Included Items:

(1) Dual output stator W/(1) 3-pin male connector, (3) male spade terminals & (3) orange rubber connector seals

(2) SERIES voltage regulators W/(4) 3-pin female spade terminals, (10) female spade terminals & (12) rubber connectors seals

(1) High output flywheel

(2) Relocation wiring harnesses with OEM-quality heavy-duty connectors

(1)Flywheel puller

(1) Stator cover gasket

Fitment

 

Installation Instructions Click here

 

ecs 4-10-24