Street Legal Kit for Polaris General by Ryco

Ryco

  • $ 338.95
  • Save $ 31.05


 No returns if sealed wiring packets are opened or box contents are installed.

Free shipping with in the lower 48 states.

Ryco #7202 Fitment:

  • General 2016+
  • General 4 2016+

Ryco #7202A Fitment

  • General 2020-2024 (With existing LED Headlights)
  • Includes 7001 Headlights with brake strobe feature, plug and play adaptor.



Ryco street legal kits have a turn signal with an integrated horn button and emergency flashers. The Ryco kit interfaces with the gauge pod in most UTVs to show when the turn signal is actuated. On the Polaris digital dash a green light flashes on each side of the dash to indicate when the signal is actuated for left or right. Some 2018+ 1000 models may require separate led turn signals to be installed that are provided in the kit. The analog dash has one green (<>) light in the middle that flashes (see retrofit note below for older kits).Three LED lights are used for each left and right turn front turn signal with a steering column mounted signal stat that also includes the horn button. The factory rear tail lights are used for the left and right turn signals. Illuminated license plate holder with night time running lights are integrated into the system to meet state regulations for highway vehicles. Wiring harness and detailed instructions are included with each kit. Satisfaction guaranteed.

Kits contain:

  • Self Canceling if you forget and leave the blinker on (turns off blinker after a couple of minutes)
  • 1x Wiring Harness
  • 6x LED Mini Lights with Bullet Ends for front turn signals
  • 2X Rear tail lights use factory tail lights for a clean professional look
  • 1X License plate holder and LED light
  • 1X Loud Horn (105 db)
  • 1x Electronic LED Flasher
  • 2x LED Turn Indicator Lights (left and  right)
  • Kit can integrate with factory speedometer to indicate turn signal flashing
  • 1x Horn Push-button Switch integrated with the signal stat
  • 1X Waterproof Signal Stat
  • 2x Lead Wires for Indicator Light with Butt Connectors
  • 4x Spade Terminals for Horn and Horn Switch
  • 12x Female Bullet Terminals for the Mini Lights
  • Complete wiring harness
  • 1x Instruction Sheet
  • 10x Wire Ties


     Note: Polaris General equipped with front bumpers may require locating front signal lights inboard and or outboard of the headlights.

     

    Be aware that Polaris machines with the Ride Command Display instrument cluster, do not include factory turn signal indicators. When installing the RYCOMOTO UTV street legal kit on these machines, DO NOT install the RYCOMOTO harness pin/wire in positions 6 and 7. When using a RYCOMOTO kit on a machine with Ride Command Display the enclosed dash indicator light assembly may be used. Note: When using kit 7202 for the Polaris General, the enclosed dash indicator light assembly may be used if the factory indicators do not operate upon installation of the kit.  

     Click Here for Dash Mount Indicator Instructions

     

    Video is for demonstration only of lights and how they operate. The 7202 kit is for a Polaris General.


    ecs 9-4-23