Polaris Ultimate Gear Reduction Set for RS1/Turbo S/ Turbo/ Pro XP (35"-37" tires)

• Approximate Low Range Reduction = 63.4%
• Approximate High Range Reduction = 23.5%
• Do not be fooled by kits claiming lower reductions, this is the lowest stackable kit available
• Stackable gear reductions can be combined with other gear reductions if needed for greater reduction
  

We can get your RZR even Lower Geared!!!  Click here for our Stackable stage 3 19% Gears 

This is our lowest gear set package for big tires. We have our upgraded the Standard Gear Reduction kit with a new even lower gear set that includes the new Turbo R gear that is about 10% lower than the Standard Ace/Ranger gear set. The overall reduction for Low gear is ~63% depending on your machine.  This reduction is ideal for riders wanting a better crawl ratio when running 35"-37" tires.  If you have ever been in a steep rock obstacle section of trail and either slipped your belt or had to give it too much throttle to get the clutch to lock up only to have your machine surge over an obstacle forcing you to jump back on your brake pedal, this is the cure.

Approximate Transmission Turn Ratio (depending on machine):

• Low 33.2:1
• High & Reverse 14.3:1

Click HERE for the turn ratio and gear reduction vs tire size discussion and calculations.

Included in the kit:
1x PN#: 3236690 Genuine Polaris 50T Stage 2 Gear
1x PN#: 3236689 Genuine Polaris 23T Reverse Gear Shaft
1x PN#: 3235232 Genuine Polaris 67T Low Gear
1x PN#: 3236132 Genuine Polaris 25T Low Gear
 For higher mileage machines and added piece of mind consider replacing the bearings and seals in your transmission while you have it apart with a Sandcraft seal kit or seals and bearings. Click HERE for Seals and Bearings

 FITMENT:

2016-2021 RZR XP Turbo 2 Seat

2016-2021 RZR XP Turbo 4 Seat

2018-2021 RZR XP Turbo S 2 Seat

2018-2021 RZR XP Turbo S 4 Seat

2020-2026 RZR PRO XP

2020-2026 RZR PRO XP 4

2018-2021 RS1

******* Be advised that to install this gear set on the older RZR XP Turbo, XP Turbo S or RZR Pro XP, the transmission case may require case grinding for clearance for the Stage 2 gear.  See photo below with .034" case relieved for location.