Denali Pro Series UTV Plow Blade

$ 649.95

Denali Pro Series UTV Plow Blade

***NOTE: Must have a winch to use plow system.***

Specify blade color in email if red or yellow is desired. Black is standard.

Denali UTV Pro Series Plow by MotoAlliance is ready for the upcoming snow season! 

Our team of engineers designed a "Cadillac" plow at a reasonable price so you don't have to skimp on quality to save money. 
This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV, preventing damage to the front end or other vehicle parts from sudden impact.

  • County-style blade with curved design cuts wet snow & throws powder out of your path; made of 12 gauge steel
  • Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar, to handle accidental impact
  • Sand-blasted powder coat with epoxy primer and TGIC Polyester top coat for ultimate corrosion protection, UV resistance and long lasting durability.  Available in red, yellow and black
  • High strength, high yield 3/16" thick Grade 50 steel wear bar for maximum durability
  • Angle Blade ranges from 16" on the low side to 23" on the high side
  • Rubber flap stabilizer bar with upgraded (stiffer) rubber flap material which prevents snow from flying over the blade
  • Plow markers included
  • Height AND Angle Adjustable Premium steel skid feet
  • Includes 3 Year Warranty on the plow blade against manufacturer defect
  • Entirely compatible with All MotoAlliance UTV Plow Systems
  • Made in the USA

DENALI Pro Series UTV Plow Push Tubes

DENALI UTV Plow Push Tubes
  • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
  • Turn system allows you to easily position your plow in 5 different angles - 0, 12.5°, 25°
  • Simple detachment system with the pull of a pin
  • Structural tube steel cross bar for added lateral rigidity
  • Quick Release Pins included
  • Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Fully compatible with Denali Pro and Standard Plow Systems.




DENALI UTV Plow Roller

The DENALI Plow Roller is ready for snow!  Designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, thus extending the life of your plow lift system.


Features
  • For use with either a steel or synthetic cable
  • Drop in replacement for standard or wide spool fairleads
    • standard spool bolt pattern: 3" x 4 7/8"
    • wide spool bolt pattern: 3" x 6.67"
  • Constructed of black powder coated 7 gauge steel
  • Two (2) roller heights for different fairlead heights and angles
  • Includes hardware and instructions
  • Save your longer winch cable for recovery purposes and add a 6ft AmSteel®-Blue DENALI Plow Cable

 

POLARIS RZR UTV Plow Mount

Our DENALI Pro Series UTV Plow mounts by MotoAlliance are made from 100% laser cut 1/4" steel. The custom slotted holes allow your blade to hug the ground while the overall design of the side walls are formed from the body which maximizes the strength of the mount. All other components of the mount are then welded together to create one impact resistant mount.

Please Note: the silver Quick Release Pins are not included with the purchase of a mount plate. They are included with the push tubes of any Denali Plow System. They may be purchased individually here.

Plow Mount Plate Fits the Following RZR Models:

RZR - MA11700

  • 2008-2014 RZR
  • 2008-2014 RZR-S
  • 2008-2014 RZR-4
  • 2012-2015 RZR 570
  • 2008-2014 RZR 800
  • 2011-2014 RZR XP 900
  • 2011-2014 RZR XP 4 900 (4 seater)


RZR - MA11706

  • 2015-2016 RZR          900 (50" frame)
  • 2015-2016 RZR-4       900 (50" frame)
  • 2015-2016 RZR          900 (60" frame)
  • 2015-2016 RZR-4       900 (60" frame)
  • 2014-2016 RZR XP    1000
  • 2014-2016 RZR-4 XP 1000
  • Please Note: Polaris Deluxe & Extreme Front Bumper may require 2 through holes to be drilled in the plow mount to allow the bottom bumper bolts to pass thru the plow mount

 

Related products