Street Legal Kit for Kawasaki Mule (Free Shipping Lower 48 States Only) by Ryco



  • $ 294.99
  • Save $ 30.01

Free Shipping with in the Lower 48 States

Ryco 4116 Fits the Mule Pro 2015 + (all years)

Ryco 4116S with Smoked Lens front Turn Signals Fits the Mule Pro 2015 + (all years)

Ryco 4100 Fits the Standard Mule ( All Years Without Tilt Steering Wheel or Taillights)

Ryco street legal kits have a turn signal with an integrated horn button and emergency flashers. The Ryco kit interfaces with the gauge pod in most UTVs to show when the turn signal is actuated. On the Polaris digital dash a green light flashes on each side of the dash to indicate when the signal is actuated for left or right. The analog dash has one green (<>) light in the middle that flashes (see retrofit note below for older kits).Three LED lights are used for each left and right turn front turn signal with a steering column mounted signal stat that also includes the horn button. The factory rear tail lights are used for the left and right turn signals. Illuminated license plate holder with night time running lights are integrated into the system to meet state regulations for highway vehicles. Wiring harness and detailed instructions are included with each kit. Satisfaction guaranteed.


  • Self Canceling if you forget and leave the blinker on (turns off blinker after a couple of minutes)

Note: If vehicle has only 1 taillight, customer must purchase a Kawasaki taillight and mounting hardware

Kits contain:

  • 1x Wiring Harness
  • 6x LED Mini Lights with Bullet Ends for front turn signals
  • 2X Rear tail lights uses factory tail lights for a clean professional look
  • 1X License plate holder and LED light
  • 1X Loud Horn (105 db)
  • 1x Electronic LED Flasher
  • 2x LED Turn Indicator Lights (left and  right)
  • Kit can integrate with factory speedometer to indicate turn signal flashing
  • 1x Horn Push-button Switch integrated with the signal stat
  • 1X Waterproof Signal Stat
  • 2x Lead Wires for Indicator Light with Butt Connectors
  • 4x Spade Terminals for Horn and Horn Switch
  • 12x Female Bullet Terminals for the Mini Lights
  • Complete wiring harness
  • 1x Instruction Sheet
  • 10x Wire Ties


  • TERYX4 2016-2024
  • Mule PRO Series (Including FX and FXT) (2015+)
  • Teryx 2 / 4 (2016 +) *Does not fit the KRX. Please see part number 4200 for KRX models.
  • This kit will also fit Mule Non-PRO *IF* the Mule has tilt steering and taillights. If your Mule does not have tilt steering / taillights, please see part number 4100
  • **For older Teryx / Teryx 4 Models please see:
  • Part Number 4100 for Teryx 2 (through 2013) & Mule Non-PRO (non tilt steering)
  • Part Number 4104 for Teryx 2 (2014-2015) and Teryx 4 (through 2015)

**4116 Info

Kit 4116 (Standard Kit) includes 6 LED front signals (see pictures)

Kit 4116S (Smoked Lens) includes 2 smoked front signal lights (see pictures)

Both Kits utilize the stock taillight assemblies for a clean factory appearance and also include: 

  • Steering column mounted turn signal switch.
  • Electronic Flasher.
  • Horn with horn switch.
  • Lighted license plate holder.
  • Complete wiring harnesses – All wires cut to length and connectors installed.
  • Snap-Plug terminals.
  • Wire ties.
  • Complete detailed / illustrated instructions.
  • Converting off-road vehicles is not legal in all states. Check local regulations for specific requirements in your area.

Note: UTVs equipped with front bumpers may require locating front signal lights inboard and or outboard of the headlights.

Please call if you cannot find your model. We have the kit! 801 367 1395

No returns if sealed wiring packets are opened or box contents are installed.

ecs 5-1-24