Street Legal Kit for Kawasaki Teryx (Free Shipping Lower 48 States Only) by Ryco

4100

Ryco

  • $ 290.00
  • Save $ 35


 

Fitment:

Teryx 2013 and Older #4100

Kawasaki Teryx 2014-15 #4104

  • TERYX 2014 - 2015
  • TERYX 4 through 2015

Kawasaki Teryx 2016 & Up #4116

Ryco street legal kits have a turn signal with an integrated horn button and emergency flashers. The Ryco kit interfaces with the gauge pod in most UTVs to show when the turn signal is actuated. On the Polaris digital dash a green light flashes on each side of the dash to indicate when the signal is actuated for left or right. The analog dash has one green (<>) light in the middle that flashes (see retrofit note below for older kits).Three LED lights are used for each left and right turn front turn signal with a steering column mounted signal stat that also includes the horn button. The factory rear tail lights are used for the left and right turn signals. Illuminated license plate holder with night time running lights are integrated into the system to meet state regulations for highway vehicles. Wiring harness and detailed instructions are included with each kit. Satisfaction guaranteed.

 

Note: If vehicle has only 1 taillight, customer must purchase a Kawasaki taillight and mounting hardware

  • Self Canceling if you forget and leave the blinker on (turns off blinker after a couple of minutes)

Part #4100

This Kit Fits:

  • Mule Non-Pro all years *IF YOUR MULE HAS TILT STEERING, PLEASE SEE PART NUMBER 4116 / 4116S. *ALSO,  - If your Mule Non PRO has only one taillight, an additional Kawasaki taillight with mounting hardware must be purchased.
  • Teryx 2 - (through 2013)

**For newer Mule PRO Series and Teryx Models, please see the following

  • Mule PRO Series (Including FX and FXT) (2015+) (P/N 4116 / 4116S)
  • Teryx 2 / 4 (2016 +) (P/N 4116 / 4116S) 
  • Teryx 2 (2014-2015) and Teryx 4 (through 2015) (P/N 4104)
  • KRX 1000 - all years (P/N 4200 / 4200A)

Kit utilizes the stock headlight and taillight assemblies for a clean factory appearance and includes: 

  • Steering column mounted turn signal switch with integrated horn button
  • Electronic self canceling flasher
  • 2 Smoke Lens front signal lights
  • Horn
  • Lighted license plate holder
  • Complete wiring harnesses – All wires cut to length and connectors installed
  • Snap-Plug terminals
  • Wire ties
  • Complete detailed / illustrated instructions

PART # 4116 AND 4116S KITS FIT THE FOLLOWING MODELS: 

  • TERYX4 2016-2024
  • Mule PRO Series (Including FX and FXT) (2015+)
  • Teryx 2 / 4 (2016 +) *Does not fit the KRX. Please see part number 4200 for KRX models.
  • This kit will also fit Mule Non-PRO *IF* the Mule has tilt steering and taillights. If your Mule does not have tilt steering / taillights, please see part number 4100
  • **For older Teryx / Teryx 4 Models please see:
  • Part Number 4100 for Teryx 2 (through 2013) & Mule Non-PRO (non tilt steering)
  • Part Number 4104 for Teryx 2 (2014-2015) and Teryx 4 (through 2015)

**PLEASE MAKE SURE TO SELECT CORRECT KIT WHEN ORDERING. FRONT TURN SIGNAL LIGHTS STYLE VARY BY KIT.

Kit 4116 (Standard Kit) includes 6 LED front signals (see pictures)

Kit 4116S (Smoked Lens) includes 2 smoked front signal lights (see pictures)

Both Kits utilize the stock taillight assemblies for a clean factory appearance and also include: 

  • Steering column mounted turn signal switch.
  • Electronic Flasher.
  • Horn with horn switch.
  • Lighted license plate holder.
  • Complete wiring harnesses – All wires cut to length and connectors installed.
  • Snap-Plug terminals.
  • Wire ties.
  • Complete detailed / illustrated instructions.
  • Converting off-road vehicles is not legal in all states. Check local regulations for specific requirements in your area.

    Other applications available if yours is not listed. Call with your brand, model, and year (801 367 1395)

    Note: UTVs equipped with front bumpers may require locating front signal lights inboard and or outboard of the headlights.

    No returns if sealed wiring packets are opened or box contents are installed.

    Free shipping with in the lower 48 states.

    Please call if you cannot find your model. Ryco has the kit! 801 367 1395

    ecs 4-13-24